+91 96771 11411 / 00992
SPECTRO
GRINDING MACHINE
GRINDING MACHINE
The spectro polishing machine has ergonomically designed. Spectro polishing machine would like used for chemical compositions of as cast material or wrought material. The electrical motor is heart of the system. It is controlled by electrical starter to product the overload damage. Machine body is fabricated from heavy-duty Sheet metal and the disc is dynamically balanced to avoid noise and vibration. The disc material used for aluminum and steel material, disc Variety for customer need for magnetic holder to solve the disc problems. The revolving disc is accommodated in a suitable circular frame work to make the machine safer to operate. The machine will remove the metal dust from suction pump. The suction pump to product the Al-oxide paper holding and sucking the dust. The machine is powder coated and suitable switch with overload tripping would be provided. A safety guard is provided at the top of the disc. In case of emergency to stop break system method adopted while mean time to stop in emergency switch product man and machine.
SPECTRO GRINDING MACHINE(TABLE TOP)
The body is fabricated from heavy-duty Sheet metal and the disc is dynamically balanced to avoid noise and vibration. The revolving disc is accommodated in a suitable circular frame work to make the machine safer to operate. The machine is powder coated and suitable switch with overload tripping would be provided. A safety guard is provided at the top of the disc.
| Technical specifications | |
|---|---|
| MAIN MOTOR | 2HP 440 volts Ac 50Hz with ISI mark. |
| DISC DIA | 350mm (Dynamically Balanced) |
| MOTOR BRAND | Motor Brand Bharat Buijilee / ISI Standard Motors |
| RPM | 2880 rpm |
| MAINS | ON/OFF Starter |
| POWER | ON/OFF Starter With over loading tripping. |
| WEIGHT | 60 Kgs. Approx. |
| SIZE | 400 X 550 X 500mm |
| TABLE SIZE | 430x430x590mm |
SPECTRO GRINDING MACHINE ( FLOOR MODEL )
The body is fabricated from heavy-duty Sheet metal and the disc is dynamically balanced to avoid noise and vibration. The revolving disc is accommodated in a suitable circular frame work to make the machine safer to operate. The machine is powder coated and suitable switch with overload tripping would be provided. A safety guard is provided at the top of the disc. Air Section for Dust Removal.
| Technical specifications | |
|---|---|
| MAIN MOTOR | 2HP 440 volts Ac 50Hz with ISI mark. |
| DISC DIA | 350mm (Dynamically Balanced) |
| MOTOR BRAND | Motor Brand Bharat Buijilee / ISI Standard Motors 9. Variable speed also available. |
| RPM | 2880 rpm |
| MAINS | ON/OFF Starter |
| POWER | ON/OFF Starter With over loading tripping. |
| WEIGHT | 75 Kgs. Approx. |
| Size | 400 X 550 X 820mm |
SWING TYPE SPECTRA SAMPLE GRINDING MACHINE
Fes Swivel Surface Grinding Machine For Polishing Coin Sample With Swing head Hard Chorme Plated column Guide Shaft Fabricated Machine Stand Screw rod with Brass net motor\Starter Cupwheel CastIron Bed Etc As per specifications Given Below
| Technical specifications | |
|---|---|
| Capacity | 40mmdia Coin Sample |
| Machine Bed | surface Finished Cast Iron |
| Motor | 2 H.P/ 2880RPM/415 V/50Hz/ Flange type of Standard Make Bharat Buijilee / ISI Standard Motors |
| Starter | DOL Starter Suitale for 2 H.P Motor |
| Table | Magnetic chuck table of 8/5or chuck to hold non -Magnetic Samples |
| Guide Shaft | single column Chrome plated ground Finished Guide Shaft fixed on surface machined Mild Steel table or Fabricated |
| Wheel Feed | through screw and brass and fixed with hand wheel |
| Wheel guard | make out of Ms Plate for better safety and adjustable to accommodate the wheel wear Wheel :150mm dia Cup wheel of Standard make |
| size | 330 X 470 X 700mm |